Cigweld MicroArc 140 Stick/DC TIG Welder - W1008162

The MicroArc140 as the name suggests, is an extremely neat and compact welding inverter. Weighing in at a slight 3kg in the hand and sized at only 100mm Wide and 185mm High on your bench, this little gem is conveniently thrown over the shoulder and taken wherever you need to go. 

With adjustable welding current from 10 to 140 amps, and adjustable Hot Start and Arc Force, you have the flexibility to run standard general purpose 2.5mm electrodes for light gauge work (less than 3.0mm plate) and 3.2mm electrodes for heavier metals. 

The MicroArc 140 also has a lift TIG function that offers stable TIG welding characteristics at 140A@20% when used with a suitable TIG torch and argon shielding gas. 

With a 10Amp plug and 3m twist lock electrode holder and work lead, its hard to go past the MicroArc140 as your lightweight portable welder of choice around the workshop or out on the job site.

Features:

• 240 Volt, 50/60Hz, 10 Amp Supply Lead Fitted to Power Source
• Current Range for this Power Source is 10 to 140A Power Source provides DC welding output.
• Power Source is suitable for 2.0mm, 2.5mm, and 3.2mm electrode sizes. Suitable for all
  electrode types except AWS E6010 Cellulose.
• This unit features a Lift TIG function that provides smooth starting and running  characteristics across a broad range of applications
• Helps to prevent the stick electrode from sticking to the work piece.
• Improves the arc start characteristics of stick electrodes
• Assists when stick welding in a tight corner or joint fit-up.
• A micro 3kg inverter in a compact 100W x 185H x 252L case with carry strap.
• Recommended generator required: 6.0kW (7.5kVA @ 0.8 PF).
• Allows the electrode to be locked securely in place.
• 3m Long Electrode Holder & Work Leads.
• Cut out protection has been fitted to the power source.
• Fully compliant to AS 60974.1-2020 Enclosure rated to IP21S.
• 1 Year Warranty on Power Source (Refer to Operation Manual for full details)

Includes:

• WeldSkill MicroArc 140 Power Source
• 3m Twistlock Electrode Holder Lead
• 3m Work Lead
• Shoulder Strap

Specifications:

• Power source dimensions: 100mm(W) x 185mm (H) x 252mm (D)
• Power source mass: 3kg
• Cooling: Fan cooled
• Welder type: Stick and Lift TIG Multi Process Inverter Power Source
• Australian standard: AS 60974.1-2020
• Number of Phases: Single Phase
• Nominal Supply Voltage: 240V AC ± 10%
• Nominal Supply Frequency: 50/60 Hz
• Welding current range: 10-140A
• Nominal DC open circuit voltage: 71V
• Effective Input Current (I_1eff): 10Amps
• Maximum Input Current (I_1max): 26Amps
• Minimum Single Phase Generator Recommendation: 6.0 kW (7.5 kVA @ 0.8 PF)
• STICK (MMAW) Welding Output, 40ºC, 10 min.: 
  • 140A@15%, 25.6V
  • 70A@60%, 22.8V
  • 54A@100%, 22.2V
• Protection Class: IP21S