Flir Infrared Camera Moisture Meter With MSX IR Camera 160X120 Pixels - MR265

Features

• The FLIR MR265 is a professional pin and pinless moisture meter with thermal imaging designed to show you exactly where to investigate issues related to moisture, air leaks, and insulation voids. Featuring IGM (Infrared Guided Measurement) and MSX® (Multi-Spectral Dynamic Imaging enhancement) technology, the MR265 helps you quickly scan and target problem areas, visually guiding you to the spot where you can confidently take measurements, analyze readings, and ensure that problems are fixed. Using FLIR Thermal Studio, you can then create and share professional reports that include findings and proof of repairs giving your clients peace of mind that mold, rot, or moisture challenges have been resolved.
• GET TO THE PROBLEM FASTER Visually scan and investigate large areas for moisture, air leaks, and other building issues without opening the wall
• Pinpoint problems at the source using the 160 — 120 (19,200 pixels) built-in thermal camera and laser
• Clearly identify the inspection area using the onboard 2 MP visible camera Eliminate guesswork with MSX, which enhances image quality by embossing visible light details onto thermal images in real time for greater edge and outline detail
• Conveniently evaluate issues while in the field on the large 2.8-inch display
• WORK SMARTER Carry fewer tools with this convenient, all-in-one thermal camera, worklight, and pinless and pin moisture meter that meets RESNET standards Take qualitative, non-destructive measurements using the built-in electromagnetic/capacitive pinless moisture sensor 
• Use the included pin probe resistive sensor for quantifiable moisture measurements 
• Built rugged to withstand up to a 2 m (6.6 ft) drop 
• Inspect in dimly lit areas using the bright, built-in worklight
• IMPROVE COMMUNICATION WITH CUSTOMERS Create professional reports using FLIR Thermal Studio to better communicate problems and repairs to customers
• Upload images into FLIR Thermal Studio to take advantage of professional thermography analysis capabilities, or use the jpeg in a software platform of choice
• Document both thermal and visual images before and after repairs to clearly show clients what problems were found, and prove that problems were fixed
• Save up to 15,000 visual and radiometric thermal images

Specifications

• Internal storage capacity: 8 GB, supports up to 15,000 images Image file type: radiometric JPEG
• Digital camera resolution: 2 MP with an 83° diagonal field of view (70.5° horizontal, 56° vertical) Display screen: 2.8-inch QVGA (320 — 240 pixels), color TFT graphical interface
• Thermal field of view: 57° horizontal — 44° vertical Supported image modes: thermal, visual, and MSX enhancement Thermal detector: FLIR Lepton microbolometer Image refresh rate: 9 Hz Laser pointer alignment: single-point centered on thermal image MSX imaging: overlays visible details on full-res thermal view
• Thermal sensitivity: less than 150 mK Spectral detection range: 8 to 14 microns Minimum focus distance for thermal capture: 10 cm Available thermal color palettes: iron, rainbow, arctic, white-hot, black-hot Thermal resolution: 160 — 120 pixels (total 19,200)
• Calibration options: auto with manual scale locking Measurement resolution: 0.1%
• Pin moisture range: 7% to 30% (±1.5% accuracy), 30% to 100% (reference only) Moisture detection materials: 11 material types grouped by construction and wood Pinless moisture range: 0 to 100% Pinless measurement depth: 19 mm
• Sampling frequency: 10 Hz Pin mode response time: 750 ms
• Pinless mode response time: 100 ms Auto shut-off settings: programmable at 0, 5, 10, 20, or 30 minutes
• Power source: 3.7 V rechargeable LiPo battery (5400 mAh) Max continuous usage: up to 10 hours
• Expected operational duration: roughly 4 work weeks per charge
• Made in China
• Warranty: 1yr + 2yr registration

Inclusions

• moisture meter
• pouch