Flir Thermal Camera Moisture Meter 80X60 - MR160

Featuring Infrared Guided Measurement (IGM), the MR160 helps you quickly target moisture issues, visually guiding you to the spot where you can confidently take measurements and analyze readings. An integrated pinless sensor and an external pin probe provide the flexibility to take either intrusive or non-intrusive measurements. The MR160 can serve as your go-to troubleshooting tool right out of the box — or as the perfect complement to any high resolution thermal camera you already own.

Features

• Troubleshoot Quickly: Easily investigate insulation and moisture issues using MR160's pinless technology or external pin probe for both non-destructive and contact measurements.
• Identify and verify moisture: Use the built-in thermal imager to locate areas of moisture. Verify the moisture level using pin and pinless moisture measurement.
• Portable, tough, and durable: Rugged design, small form factor, and internal rechargeable battery for convenience to carry with you
• Thermal resolution: 4800 pixels (80 — 60), captured by a FLIR Lepton microbolometer

Specifications

• Spectral response range: 8 to 14 µm with thermal sensitivity below 0.15°C Field of view: 51° horizontal by 38° vertical Minimum focus distance for thermal imaging: 10 cm
• Image display includes color-coded moisture alerts and automatic calibration Laser alignment: single-pointer guides thermal center targeting Frame rate: 9 Hz for fluid thermal visualization
• Moisture measurement via external pin probe: 0 to 100% WME, ±5% accuracy across 9 material types
• Pinless moisture scanning range: 0 to 100 (relative), with maximum depth of 19 mm (0.75")
• Measurement resolution: 0.1%
• Response times: 750 ms (pin mode) and 100 ms (pinless mode)
• Saved image format: BMP with embedded measurement overlays
• Onboard storage capacity: up to 9999 images
• Power source: integrated 3.7 V, 3000 mAh Li-ion battery charged via micro USB
• Runtime: up to 18 hours continuous use; typical usage spans around 4 work weeks
• Made In China
• Warranty: 1yr + 2yr registration

Inclusions

• moisture meter
• pouch
• charging cable