Description
The PROMAX 350 electronic welding helmet is suitable for MIG, Stick & TIG welding. Stand-out features include; 4 senors for reliable switching & a generous viewing area, larger than many other helmets in this class. Variable Shade 9-13, Sensitivity & Delay Adjustments, Grind-Mode switch, replaceable battery, magnification lens holder & more. Comfortable, very lightweight & superior optics.
Specifications:
- Suitable Welding Processes: MIG, MMA/Stick & TIG (≥5 amps), Grinding
- Suitable Applications: Light industrial & maintenance, Rural, etc
- Switching Speed: Conforms to & exceeds requirements of AS/NZS 1338.1 Standard
- Arc Sensing: 4 Sensors
- TIG Optimised: Yes. Suitable for low-amp TIG down to 30 amps
- Power Supply: 1 x CR2032 replaceable battery & Solar assist
- On / Off: Ready to use at any time, no switching required
- Inactive Shade (Grind/Off): Shade 4
- Active Shade (Weld): 9-13
- Sensitivity: Low – High
- Delay: 0.1 – 1.0 seconds
- Grind Mode: Switchable On/Off
- Weight: 480g
- Viewing Area: 100x53 mm
- Cover Lens - Inner: 116 x 95mm – Part No. WC-05321 (pkt 5)
- Cover Lens – Outer: 115 x 104mm – Part no. WC-05323 (pkt 10)
- Magnification Lens Holder: Takes standard 108x51mm Magnification Lenses
- Standards Compliance:
- Lens: AS/NZS1338.1, EN379, ANSI Z87.1, CSA Z94.3
- Shell: AS/NZS1337.1 High Impact EN 175 B, ANSI Z87.1, CSA Z94.3
- Optical Rating 1/1/1/2 (Optical quality / Diffusion of light / Variation in luminous transmittance / Angle dependency)
- Warranty: 2 years (on auto darkening lens)
- Temperature Range: Operating -5°C to +55°C / Storage -10 to +65°C
Reviews
Write a Review
Write a Review
