Bordo Carbide Burr 1/2''

Non-Ferrous Cut Burrs

Non-Ferrous Cut Burrs are designed for rapid stock removal with minimum chip loading resulting in longer life and reduced clogging.

Applications

Non-Ferrous Cut Burrs are for use on non-ferrous and non-metallic materials such as

aluminium

brass

copper

bronze

coarse plastic

hard rubber

reinforced plastic and

fibreglass composite

Usage

It may be necessary to alter the running speeds from those shown in the speed chart in order to achieve optimum performance

Harder materials require slower running speeds

Smaller burrs require faster running speeds

Long shank burrs require slower speeds for safety reasons

Apply constant movement and light pressure when using the burr

Running below the optimum speed will cause chipping

Running above optimum speed will cause premature tooth wear

Allowing the burr to become too hot may cause the braze to soften, and cause the head to become detached from the shank

Using tools and collets which have become worn will cause chipping

Do not sink the burr for more than one third of its periphery

Bordo Burr Cylindrical NF 1/2"x1/4" SA-5 - 6401-95299