Unimig Envy Cut 120 Plasma Cutter - U11540

Features

• Set and forget with the built-in digital air pressure regulator
• The CNC connection means you can use this machine for every kind of plasma application
• Start your arc on any surface with pilot arc start
• Easily navigate and adjust parameters with the LCD touchscreen
• 50mm clean cuts and 70mm cutting capacity
• Cut anything with the perforated cut mode
• 2T/4T torch trigger modes
• Check your compressor is connected with the Air Test

Specifications

• TECHNICAL DATA SKU: U11540 Primary Input Voltage: 415V three phase Supply Plug: 32A Ieff: 27.5 A Imax: 27.5 A Rated Output: 20 to 120 A No Load Voltage: 402 V Protection Class: IP21S Insulation Class: H Minimum Generator: 26 kVA Air Flow Draw: 140 to 330 L/min Air Flow Pressure: 43.5 to 101.5 psi / 3 to 7 bar / 0.3 to 0.7 MPa Dinse Connector: 35/50 Standard: AS 60974.1 Warranty: 5 years PLASMA SPECIFICATIONS Plasma Cut Current Range: 20 to 120 A Plasma Cut Duty Cycle at 40°C: 100 percent at 120 A Mild Steel Cut Thickness: 50 mm Mild Steel Severance Thickness: 70 mm Stainless Cut Thickness: 45 mm Aluminium Cut Thickness: 40 mm Copper Cut Thickness: 25 mm SIZE AND WEIGHT Dimensions: 810 x 280 x 520 mm Weight: 39.2 kg
• Made In China
• Warranty: 60 Months

Inclusions

• ENVY CUT 120 Plasma Cutter 6m SC160 Plasma Torch 4m 300A Earth Clamp & Lead Operating Manual