Unimig Envy Cut 160 Plasma Cutter - U11541

Features

• Set and forget with the built-in digital air pressure regulator
• The CNC connection means you can use this machine for every kind of plasma application
• Start your arc on any surface with pilot arc start
• Easily navigate and adjust parameters with the LCD touchscreen
• 65mm clean cuts and 80mm cutting capacity
• Cut anything with the perforated cut mode
• 2T/4T torch trigger modes
• Check your compressor is connected with the Air Test

Specifications

• Primary Input Voltage: 415V three phase
• Supply Plug: 32A
• Ieff: 32.9 A
• Imax: 42.4 A
• Rated Output: 20 to 160 A
• No Load Voltage: 400 V
• Protection Class: IP21S
• Insulation Class: H
• Minimum Generator: 40 kVA
• Air Flow Draw: 140 to 330 L/min
• Air Flow Pressure: 43.5 to 101.5 psi / 3 to 7 bar / 0.3 to 0.7 MPa
• Dinse Connector: 35/50
• Standard: AS 60974.1
• Warranty: 5 years 
• Plasma Cut Current Range: 20 to 160 A 100% @ 100A
• Plasma Cut Duty Cycle @ 40°C: 60% @ 160A 
• Mild Steel Cut Thickness: 65 mm
• Mild Steel Severance Thickness: 80 mm
• Stainless Cut Thickness: 60 mm
• Aluminium Cut Thickness: 50 mm
• Copper Cut Thickness: 35 mm
• Dimensions: 810 x 280 x 520 mm
• Weight: 45.4 kg
• Made In China
• Warranty: 60 Months

Inclusions

• ENVY CUT 160 Plasma Cutter
• 6m SC160 Plasma Torch
• 4m 300A Earth Clamp & Lead
• Operating Manual