Unimig Envy Cut 45 Air Plasma Cutter - U11604

Features

• Five inch colour LCD touchscreen with intuitive controls.
• Power Factor Correction for improved efficiency and stable output.
• Smart Fan technology for lower noise, reduced power use and cleaner airflow.
• Job Memory storing up to 100 custom cut settings.
• Generator compatible with a recommended minimum of 10 kVA.
• IP21S rated for protection against contact and vertical water spray.
• Digital air pressure regulation that auto adjusts for each cutting mode.
• Smart Set programs that configure cutting parameters based on material and thickness.
• CNC connectivity for both handheld and table based plasma cutting.
• Perforated cut mode for smooth cutting on mesh, grating and non solid materials.

Specifications

•  U11604 Primary Input Voltage: 240V Single Phase
• Supply Plug: 15A
• Ieff: 14.5 A
• Imax: 26.5 A
• Rated Output: 20 to 45 A
• No Load Voltage: 380 V
• Protection Class: IP21S
• Insulation Class: H
• Minimum Generator: 10 kVA
• Air Flow Draw: 190 to 245 L/min
• Air Flow Pressure: 65.27 to 87.02 psi / 4.5 to 6.0 bar / 0.45 to 0.6 MPa Dinse Connector: 35/50 Standard: AS 60974.1
• Plasma Cut Current Range: 20 to 45 A
• Plasma Cut Duty Cycle at 40°C: 30% @ 45A 60% @ 32A 100% @ 25A
• Mild Steel Cut Thickness: 20 mm
• Mild Steel Severance Thickness: 25 mm
• Stainless Cut Thickness: 18 mm
• Aluminium Cut Thickness: 14 mm
• Copper Cut Thickness: 8 mm 
• Dimensions: 665 x 220 x 425 mm
• Weight: 23.1 kg
• Made In China
• Warranty: 60 Months

Inclusions

• ENVY CUT 45 AIR Plasma Cutter
• 6m SC80 Plasma Torch
• 4m 300A Earth Clamp & Lead
• Operating Manual