Unimig Razor Cut 40 Air Plasma Cutter - U14001K

FEATURES:

• Built-in Air Compressor
• 15 AMP Plug
• Pilot Arc Start
• 10mm Clean Cut
• 12mm Severance
• Air Test

SPECS:

• PRIMARY INPUT VOLTAGE: 240V Single Phase
• SUPPLY PLUG: 15A
• RATED INPUT POWER (kVA): 7.2
• RATED INPUT CURRENT (A): 30
• RATED OUTPUT VOLTAGE (V): 96V
• NO LOAD VOLTAGE (V): 210
• Ieff (A): 15
• AIR FLOW DRAW OFF (L/min): 120
• AIR FLOW PRESSURE (Bar): 5.17 (75 psi)
• PROTECTION CLASS: IP21
• INSULATION CLASS: H
• MINIMUM GENERATOR (kVA): 10
• DINSE CONNECTOR: 43763
• STANDARD: AS/NZ60974-1
• WARRANTY (Years): 3
• PLASMA CUT CURRENT RANGE: 20-40A
• "PLASMA CUT DUTY CYCLE @ 40C: 25% @ 40A
• 60% @ 26A
• 100% @ 20A"
• MILD STEEL CUT THICKNESS: 12 / 16
• MILD STEEL SEVERANCE THICKNESS: 14 / 18
• ALUMINIUM CUT THICKNESS: 6 / 8
• ALUMINIUM SEVERANCE THICKNESS: 8 / 10
• STAINLESS STEEL CUT THICKNESS: 6 / 8
• STAINLESS STEEL SEVERANCE THICKNESS: 8 / 10
• DIMENSIONS (mm): 610x215x420mm
• WEIGHT (kg): 18kg
• PLASMA ARC START: Pilot Arc
• THERMAL OVERLOAD PROTECTION: Over Temperature Warning
• Made in China

INCLUDES:

• RAZOR CUT 40 AIR Plasma Cutter
• 6m SC80 Plasma Torch
• 4m 300A Earth Clamp & Lead
• Operating Manual